Help Define the Veson Roadmap
At Veson Nautical, we greatly value and appreciate feedback from our client community. Help influence and guide our future development by submitting feature suggestions and voting on items that are valuable to your organization.
Features and comments are moderated regularly, usually within 24 hours of submission. Veson moderators add tags for easier searching and filtering.
Features with over 20 votes are evaluated by Veson both for alignment with the existing Roadmap, and for the size and impact on the development schedule. If a feature is accepted, the status will change to “Planned” and it will be tagged with the projected calendar quarter where development will occur.
If a suggestion does not garner more than 10 votes after three months, it will be set to status "Archived". Items that receive 10+ votes within three months will remain on the board and be sized once they reach 20 votes, as above.
Features and comments are moderated regularly, usually within 24 hours of submission. Veson moderators add tags for easier searching and filtering.
Features with over 20 votes are evaluated by Veson both for alignment with the existing Roadmap, and for the size and impact on the development schedule. If a feature is accepted, the status will change to “Planned” and it will be tagged with the projected calendar quarter where development will occur.
If a suggestion does not garner more than 10 votes after three months, it will be set to status "Archived". Items that receive 10+ votes within three months will remain on the board and be sized once they reach 20 votes, as above.
Add TCO Bunker Adjustment to the Estimate P&L
I'd like to be able to include the TCO Bunker Adjustment in the Estimate P&L, as this throws off my Estimate vs. Actuals comparison.
Ability to amend TC broker commission rate after invoicing
Sometimes, I would notice that my TC broker commission rate is wrong only after I have paid some commission to the broker.
In cases like this, I would like to ...
Decimal place for CP quantity in order for deadfreight percentage and deadfreight rate to be correct
Need to have decimal place activated for CP quantity for deadfreight percentage and deadfreight rate to show the correct figure. Current function only rounds to whole ...
Ability to Add Laycan to TCO Estimates
I would like to be able to add laycan information into a TCO estimate, and would like the system to automatically add waiting time to the itinerary when a user ...
Have Dates show in a different colour if on a weekend - Estimates & Voyages
It would be a great help to our Chartering and Operations team to know if the scheduled Port Days fall on a weekend.
The system should be able to work out if a date ...
Deadfreight for declared QTY
IMOS can currently only cope with deadfreight below CP minimum quantity, but it does not cover deadfreight on declared quantity (eg. draft issues, cargo shortage). ...
Record of CO2 emissions in voyage PNL
Post our upgrade to version 7.11.15080 we see that there is an introduction of column CO2 in Voyage Itinerary under consumption tab. This column has quantity reported ...
Show Revisions on Voyage Fixtures
As a charterer/operator, I'm actively using/editing the Voyage Fixtures workspace and thus I want to be able to have visibility on which user has entered a value and ...
Include Port Function I (Canal Transit) for Demurrage Days estimation in Voyage Estimator
We request Veson to add Port Function "I" (Canal Transit) to the Demurrage Days functionality in the Voyage Estimator. Such time estimated must flow on to the ...
Add "Fueling" Port Function to the Routes Grid in Vessel Details
In Vessel Details, I can specify default port costs, waiting days, and etc for given ports/waypoints in the Routes tab. However, I can only specify either Canal ...
Estimate column view - drag and drop location
in enterprise one could minimize "hide" estimates in order to compare 2 which were further apart. ideally it would be nice to be able to drag and drop estimates in a ...
CFGAutoCalcPortExpenses to split average cost for Canals, as per Ballast Cost and Laden cost
With CGFAutoCalculatePortExpenses enabled, when averaging the last 5 canal expenses, IMOS does not separate between Ballast Canal Cost, and Laden Canal Cost.
The ...
Voyage Estimator – CP Qty vs L/D Qty in the P&L calc.
When new configuration flag “CFGVoyestCriteriaForZeroProfit” value is set to CPQtyMismatch, the waring for the user is visible, e.g. the Voy Est PnL is completely ...
Voyage Estimator - Default number of port days and extra port days
For organisations where the number of port days and extra port days is fairly standard it would be great if a config option can set these as a default for every load ...
Create a Config Flag to prevent Charterers from deleting Worksheets created by others
...Create a Config Flag to prevent Charterers from deleting Worksheets created by others
Help save the planet - Emissions Calculator
Shipping accounts for around 3 percent of global Green House Gas (GHG) emissions. As an industry we must start acting now to reduce emissions for two reasons; ...
IMOS LIST VIEW column options MUST include all CRITICAL counterparties
Charterers create value by interacting quickly with Owners, Charterers and Brokers. Having list views in IMOS that have ability to view which BROKERS, OWNERS, ...
Vessel Schedule - Adding GMT view
Current "vessel schedule" Gantt Chart is displayed on LT. And it can only be toggle between day, week, month and year. We would like to be able to toggle to GMT or ...
Ability to Order and Filter the Estimate Worksheets that appear in the collapsed column
Charterers do not always need to see the complete list of Worksheets on the left of the Estimates they are working on - it actually becomes useless very quickly. ...
Voyage Estimate Capability to calculate NET differences in 2 ESTIMATES
Voyage Estimator Menu Selection exists to COMBINE ESTIMATES BUT does not have a NET option, which would eliminate manual calculations outside of the IMOS systems when ...
Ability to add drafts in the CP Terms Details window
In order to have all important details on one page, would suggest to put an additional column in the CP Terms Details window as attached. So that we do not miss ...
Drop and Pick around Sumed Pipeline and Suez Canal
Propose to have a Max volume loaded as a field to cover the situation where a vessel enters the Sumed system, drops off cargo into the pipeline system. Transits the ...
Config flag to turn off editing bunker ROB values for Ports in Voyage estimate
Users to use the vessel consumption updated in the vessel details for calculation. Any inaccuracy should lead to reviewing the speed and consumption updated on the ...
Copy an Estimate Field to all other Estimates in the Worksheet
As a Charterer, I often want to change a value across all estimates in a worksheet, so I can use that value as a constant. Right now, I have to manually update each ...
Auto-save on Estimates
Our freight traders typically open 10 to 20 estimates which they do not initially save. At some point they will save some of them but during the day, they expect the ...
Improve distinction between individual Estimates within a Worksheet
Once multiple Estimates have been created within a single worksheet, it starts to become a bit of a visual mess.
We suggest a bolder border for each Estimate, or an ...
Make the Estimate Warning triangle more prominent
The warning triangle is rather difficult to see on an Estimate.
Please make this more prominent (Bolder, brighter / more effective colour)
To lock individual estimate calculations
To have the function to lock individual estimate calculations, so that there will not be accidental changes to the base calcs. Users can always copy this base calcs ...
Improve 'In progress voyage'
Make the estimation and fixing for commenced voyages easier. (= feature In progress voyage)
The in progress voyage tool allows estimations to be made when a voyage ...
Add Demurrage calculation in Unpriced Component
Laytime calculation to be able to read demurrage amount from unpriced component in Cargo Contract when the demurrage is based on Index Rate.
As a charterer, I ...
Reverse TCE Calculations for TC estimate
In IMOS, users are able to reverse calculate the details for a hire just by changing the TCE number to the targetted number. (i.e. i type in my target TCE and the ...
Increase # character limit for field Contract ID
Hello IMOS Community,
We would like to propose the following Feature Request which would benefit everyone:
- Increase the current character limit of 32 for the ...
VIP Scheduling Optimizer - CO-load option
Would like to see the option of choosing whether the optimizer should consider doing co-loads or not i.e. co-load cargoes from multiple load ports in same voyage. ...
Make the sustainability icon more visible on estimates
Make the sustainability icon more visible on voyage estimates for traders when they perform calculations, i.e. similar to what we have in operations, visible on the ...
Manually order your worksheets in estimates
Currently it is not possible to manually move the worksheets in estimates. It would be helpful to order the worksheets alphabetically or to the user's own preference
ability to delete benchmark estimate from the cargo
When a charterer made a mistake of assigning 'benchmark estimate' in the cargo contract, it can no longer be removed (it can only change). User would need to ...
More filters for Cargo Schedule
Add more filters such as Charterer, Cargo, POL, POD, etc in Cargo Schedule so that the users can have the overview of COA cargo status.
Daily fixed rate commission in TCI
We can add a fixed rate TCI commission, but this is not shown in the voyage estimate. When scheduling the voyage is the amount shown and deducted from the P&L result. ...
Improvements to prevent that alert notifications are often overlook in the Voyage Estimator
As we all try to make the most of the task & alert capabilities, a wealth of information is made available to Chartering staff there. Unfortunately in a busy ...
Bulk delete Estimate Worksheets (multiple)
On https://veslink.com/#operations/forms, there's a handy little select all for Form Errors that allows users to mass approve or mass reject forms.
We're missing ...
Include Extra Port Days In CP Term Details (without enabling Charterer View config Flag)
Please include extra port days or XPD Field in the CP Term Details so when importing cargo/estimate it will carry over any extra port days.
The only way to add ...
Multi tiered overage
Part of our business operates Afras in the black Sea, it is industry standard in that area to have an overage tier i.e. min 80kt, 0 overage 80-85kt, over 85kt 50% ...
TC IN - Lifting Options Optionality
If there is an option for the TC IN we will add that to the Lifting Options. However, if the same option has +-30 days and we update the min, max fields the system ...
USGTI - Provide a US Sourced Gross Transport Income calculation
From 2015 onwards, the United States have imposed a 4% tax on all foreign corporation’s US source gross transportation income. The income is defined as 50% of the ...
Rebillable Port Expenses not to be added to the amount of the Port Expense Search
The Port Expenses search is used in order to estimate the expenses in future voyages. The rebillable port expenses paid by others should not be part of them.
Vessel details > DWT/draft > Add row for Panama old locks 12.04m TFW
Please add a row for Panama Canal old locks 12.04m TFW in the vessel description DWT/draft so that cargo intakes are more accurate. Currently intakes on our vsls can ...
chartering - worksheets - enable to make work sheets private or public
would be a good feature if not entire chartering team can see a work sheet created but one person i know that there are filters. but they then have to be run every ...
Estimate Approval
Feature request to have an approver to approve the estimate before it get fixed. The estimator and approver are two separate people involved, however the estimator ...
'CFGAutoCalcPortExpenses' should consider Port Function when estimating port expenses
***Michael from TS Boston migrating original Feature Request case to Feature Board for Ultranav***
'CFGAutoCalcPortExpenses' currently operates as described ...
Define the fleet list for COA and notify the end user if owner-nominated vessel is not approved
Define the fleet list for a specific COA and notify the end user if an owner-nominated vessel is not on the approved fleet list